QS605 Grapple Processor

QS605 Grapple Processor
Free
  • qs605_grapple_processor_render_1200x1200_front
  • qs605_grapple_processor_render_1200x1200_front
  • qs605_grapple_processor_render_1200x1200_front
  • qs605_grapple_processor_render_1200x1200_front
  • qs605_grapple_processor_render_1200x1200_front
  • qs605_grapple_processor_render_1200x1200_front
  • QS605 Grapple Processor
  • QS605 Grapple Processor

QS605 Grapple Processor

4X4 equals increased traction, torque, and delimbing force.


The QUADSTAR grapple processor is heavy duty and built to last.

The QS605 Grapple processor is designed to be able to sort, shovel and load like a grapple and process, measure and cut with all the advantages of a Southstar processor. Combine your loading and processing into one effective machine. The QS605 is designed for medium to large sized wood with an optimum operating size of 22-26” in diameter. This large multi tree grapple processor is packed full of design features that set it apart from the competition.

Grapple delimb arms

Extra large grapple delimb arms to maximise capacity while retaining delimbing excellence. Unique drive arm design fold out when loading for extra capacity.

Tilt lock system

Powerful tilt lock system - activated with twin cylinders allowing this grapple processor to operate without a heel attached.

Tilt leveling software

Combined with innovative tilt levelling software to control logs when loading from back of trailer or handling wood off centre.

Dual rotate motor drive

Powerful dual rotate motor drive allows operator to rotate logs up steep slopes and when loading trucks on uneven ground.

4x4 drive system

Powerful 4x4 drive system providing amplified torque in large wood when processing, while increasing productivity with the ability to multi-stem small wood.

Side Stepping

Innovative patent pending Side Stepping drive feature allowing for independent control of two stems. This allows the operator to align butts, trim defects out of one stem but not the other and or, process one stem and not the other.

Dual find end

Dual find end sensors to eliminate wastage when multi tree processing.

Dasa 5

Controlled with proven DASA 5 computer system combined with Southstars unique Startrax satellite communication system.

Taper Lock Collar

Large diameter pins with Taper Lock Collar design for decreased wear and increased life expectancy.

DGlide

State of the art DGlide bushing material for extended life and durability of pins.

Download Brochure
Metric Imperial
DIMENSIONS & WEIGHT Weight including rotator top and link 3,472 kg 7,654 lb
Height in processing position including rotator top and link 2,018 mm 79″
Maximum width with arms open 2,350 mm 93″
DRIVE SECTION Motor cc standard (drive arm) 1,048 cc 1,048 cc
Motor cc standard (fixed center drive) 630 cc  630 cc
Maximum drive roller opening 1,290 mm 32″
Minimum drive roller closing diameter 80 mm 3.1″
Feed speed 4.8-5.7 m/s 15.5-18.7 ft/s
DELIMB SECTION Maximum delimb opening 939 mm 37″
Minimum delimb closing diameter 120 mm 4.7″
2 STEM PROCESSING +/- 1″ accuracy 300 mm 12″
3 STEM PROCESSING +/- 1″ accuracy 200 mm 8″
BUTT SAW Saw type Southstar 3/4 Southstar 3/4
Bar size 965 mm 38″
Chain pitch 19.05 mm 3/4″
Chain auto tension
TOP SAW Bar size 642 mm 25.5″
Chain pitch 10.26 mm .404″
CONTROL SYSTEM Dasa5 standard with detailed production reports
Optional additions:
– Full optimisation
– Electronic Callipers for electronic calibration
OPTIONAL CONFIGURATIONS – Butt saw chain grease system
– Continuous 360° rotation
– 400° rotation
– Startrax Satellite Communication System
Optional Optional
CARRIER REQUIREMENTS Size 25,000-30,000kg 25-30 t
Maximum pressure 35 Mpa 5,076 Psi
Optimum flow @ pressure 300-350 l/min @ 15 Mpa 79-93 Gl/min @ 2,175 Psi

*The manufacturer reserves the right to amend these specifications at any time without prior notice

.

QS605 Thumb nail steel feed wheelsQS605 Debarking steel feed wheelsQS605 Aggressive steel feed wheelsSatellite Communication System
Category: