QS630 Processor

QS630 Processor
Free
  • QS630 Tree Harvester Low Tilt Angle
  • QS630 Tree Harvester Low Tilt Angle
  • QS630 Tree Harvester Low Tilt Angle
  • QS630 Tree Harvester Low Tilt Angle
  • QS630 Tree Harvester Low Tilt Angle
  • QS630 Tree Harvester Low Tilt Angle
  • QS630 Tree Harvester High Angle
  • QS630 Tree Harvester Front View
  • QS630 Tree Processor 2
  • QS630 Tree Processor

QS630 Processor

4X4 equals increased traction, torque, and delimbing force.


The QUADSTAR harvester processor range is heavy duty and built to last.

The QS630 is built for the toughest of environments, for the largest sized stems, ideal for harvesting or road-side processing.

The QS630 is designed for the toughest harvesting environments, for the largest sized stems with an optimum operating size of 24-32” in diameter. This heavy duty processor has not compromised speed and is packed full of design features that set it apart from the competition.

4X4

4X4 extra wide feed rollers for increased surface contact with the log. Large diameter wheels for increased speed.

Parabolic Spring

Innovative Parabolic Spring drive arm timing link to allow for variation in stem profile without loss of traction.

Wide Chassis Structure

Wide Chassis Structure for improved structural strength and increased single and multi-tree processing capacity.

Hose Through

Clean Hose Through design with Taimi swivel or 360 rotation option to better protect hoses.

Taper Lock Collar

Large diameter pins with Taper Lock Collar design for decreased wear and increased life expectancy.

DGlide

State of the art DGlide bushing material for extended life and durability of pins.

Fabricated Delimb Arms

Fabricated Delimb Arms with replaceable wear resistant alloy cutting edges.

Download Brochure
Metric Imperial
DIMENSIONS & WEIGHT Weight including rotator top and link 4,524 kg 9,974 lb
Height in harvest position including rotator top and link 3,315 mm 130.5″
Maximum width with arms open 2,03 mm 83″
DRIVE SECTION Motor cc standard (drive arm) 1,395 cc 1,395 cc
Motor cc standard (fixed center drive) 800 cc  800 cc
Maximum drive roller opening 1,085 mm 42.5″
Minimum drive roller closing diameter 80 mm 3.1″
Feed speed 4.4-5.3 m/s 14.4-17.4 ft/s
DELIMB SECTION Maximum delimb opening 813 mm 32″
Minimum delimb closing diameter 80 mm 3.1″
2 STEM PROCESSING +/- 1″ accuracy n/a n/a
3 STEM PROCESSING +/- 1″ accuracy n/a n/a
BUTT SAW Saw type Southstar 3/4 Southstar 3/4
Bar size 1,016 mm 40″
Chain pitch 19.05 mm 3/4″
Chain auto tension
TOP SAW Bar size 762 mm 30″
Chain pitch 19.05 mm 3/4″
CONTROL SYSTEM Dasa5 standard with detailed production reports
Optional additions:
– Full optimisation
– Electronic Callipers for electronic calibration
OPTIONAL CONFIGURATIONS – Butt saw chain grease system
– Continuous 360° rotation
– 400° rotation
– Startrax Satellite Communication System
Optional Optional
CARRIER REQUIREMENTS Size 30,000-35,000kg 30-35 t
Maximum pressure 35 Mpa 5076 Psi
Optimum flow @ pressure 300-360 l/min @ 15 Mpa 79-95 Gl/min @ 2175 Psi

*The manufacturer reserves the right to amend these specifications at any time without prior notice

QS630 Thumb nail steel feed wheelsQS630 Aggressive steel feed wheelsSatellite Communication System
Category: